ABSTRACT
RESUMEN El fenómeno de Raynaud es un trastorno clínico, caracterizado por ataques episódicos de vasoespasmo de arterias y arteriolas periféricas, causando así isquemia tisular de porciones distales del cuerpo, como manos y pies, produciendo cambios en la coloración de la piel como: palidez, cianosis e hiperemia. Se ha asociado la aparición del fenómeno de Raynaud en personas que manipulan solventes orgánicos o herramientas vibratorias por un largo período, incluso se ha descrito que los solventes pueden ser gatilladores de algunas enfermedades inmunológicas como la esclerodermia, sin embargo, hasta donde conocemos no existen reportes de la exposición de compuestos químicos utilizados en la metalurgia, como el ácido nítrico y el desarrollo de enfermedades de espectro esclerodérmico. En el presente artículo se presenta un caso clínico relacionado con la aparición de fenómeno de Raynaud frente a la exposición a compuestos químicos utilizados en la metalurgia, en especial al ácido nítrico.
ABSTRACT The Raynaud phenomenon is a clinical disorder, characterized by episodic attacks of vasospasm of peripheral arteries and arterioles, causing tissue ischemia of distal portions of the body, such as hands and feet, causing changes in skin color such as pallor, cyanosis and hyperemia. The occurrence of the Raynaud phenomenon in people who handle organic sol vents or vibratory tools has been associated for a long time, and it has even been described that the solvents may be triggering some immune diseases such as scleroderma, however, as far as we know there are reports of exposure of chemical compounds used in metallurgy, such as nitric acid and the development of scleroderma-spectrum diseases. This article presents a clinical case related to the appearance of Raynaud s phenomenon against exposure to chemical compounds used in metallurgy, especially nitric acid.
Subject(s)
Humans , Female , Adult , Raynaud Disease , Nitric Acid , Cyanosis , Hyperemia , IschemiaABSTRACT
Objective@#To investigate the optimal strategy for immunohistochemical (IHC) staining in bone metastasis specimens from breast cancer.@*Methods@#Twenty-eight bone metastases specimens from breast cancers were divided into three groups and subjected to different decalcifying agents (group A-10% nitrate, group B-EDTA decalcification, and group C-imported decalcifying solution RapidCal). The effects of those on HE and IHC staining for Ki-67, ER, PR, GATA3, RANK, RANKL, HER2 and HER2 FISH results were assessed.@*Results@#There were no significant differences among three groups in HE morphology and IHC staining. Antigen content in the RapidCal group were all intact; the EDTA group showed a similar staining rate, which was better than the nitrate group (P<0.05). Nitrate group showed marked reduction in nuclear Ki-67 staining, but the loss of cytoplasmic antigens (RANK, RANKL) was less than cell membrane antigen (HER2). For FISH, the RapidCal group and EDTA group showed same results, concordant with IHC staining results. The expression of HER2 protein in the nitric acid group was significantly decreased and chromosome 17 labelling was lost (P<0.05).@*Conclusions@#RapidCal treated bone metastases specimens from breast cancer show excellent sample quality in morphological, IHC and FISH results compared with traditional decalcifying agents. Owing to the longer time of EDTA decalcification, the new decalcifying agent RapidCal plays an important role in quality control and clinical application.
ABSTRACT
PURPOSE: The aim of this study was to compare the surface roughness of zirconia when using Zircos E etching system (ZSAT), applying a nitric acid-hydrofluoric acid compound as a pretreatment agent, and also to compare the shear bonding strength according to different resin cements. MATERIALS AND METHODS: ZSAT, air abrasion, and tribochemical silicacoating were applied on prepared 120 zirconia specimens (10 mm in diameter, 7 mm in height) using CAD/CAM. Each 12 specimens with 4 different resin cements (Panavia F 2.0, Rely X Unicem, Superbond C&B, and Hot bond) were applied to test interfacial bond strength. The statistical analysis was performed using SAS 9.1 (SAS Institute Inc., Cary, NC, USA). The results are as follows: after application of the ZSAT on the zirconia specimens, surface roughness value after 2-hour etching was higher than those after 1- and 3-hour etching on SEM images. RESULTS: For Superbond C&B and Rely X Unicem, the specimens treated with ZSAT showed higher shear bond strength values than those treated with air abrasion and tribochemical silicacoating system. Regarding the failure mode of interface over cement and zirconia surface, Rely X Unicem and Hot bond showed cohesive failures and Panavia F 2.0 and Superbond C&B showed mixed failures. CONCLUSION: Zircos E etching system in zirconia restoration could increase its shear bond strength. However, its long term success rate and clinical application should be further evaluated.
Subject(s)
Adhesives , Resin CementsABSTRACT
This study was aimed to explore the impact of activated carbon adsorption modified by different concentrations of nitric acid and ammonia,in order to examine the impact on adsorption of mannotriose by modified activated carbon.The activated carbon was processed by different concentrations of nitric acid and ammonia.And then,the adsorption capacity of benzene,iodine,methylene blue and the purification effects on mannotriose were measured.The results showed that the active carbon modified by nitric acid and ammonia had some changes of adsorptions for methylene blue,iodine and benzene.The purification effect of mannotriose with nitric acid-modified activated carbon was declined.The purification effect of mannotriose with ammonia-modified activated carbon was increased.It was concluded that the pore structure of activated carbon had been changed by nitric acid and ammonia.The adsorption capacity of nitric acid modified active carbon to mannotriose was declined.However,the adsorption capacity of ammonia modified active carbon to mannotriose was increased.It showed that ammonia modified active carbon was suitable for the purification of mannotriose.And the adsorption capacity of iodine reflected the adsorption capacity of mannotriose by active carbon.
ABSTRACT
RESUMOA espécie Bombax malabaricum, popularmente conhecida por paineira-vermelha, apresenta metabólitos secundários de interesse medicinal. Como outras espécies da família Malvaceae, suas sementes possuem dormência tegumentar, o que dificulta sua propagação sexuada. Assim, o presente trabalho objetivou superar a dormência de sementes de B.malabaricum por métodos físicos e químicos. Os métodos utilizados na escarificação mecânica foram: abrasão do tegumento com lixa e corte com tesoura na região oposta ao hilo. Para a escarificação química foram utilizados: ácido clorídrico (HCl), ácido nítrico (HNO3), ácido sulfúrico (H2SO4), hidróxido de sódio (NaOH) e hidróxido de potássio (KOH) por um período de 30 minutos. Também houve imersão de sementes em 40 mg L-1 de GA3 pelo mesmo período. Foram utilizadas quatro repetições por tratamento, constituídas de 25 sementes por placa e conduzidas em Câmara de Germinação. Os dados obtidos foram utilizados para o cálculo da Germinabilidade, Índice de Velocidade de Germinação, Tempo Médio de Germinação, e Porcentagem de Sementes Deterioradas. O HNO3 mostrou-se como o melhor tratamento na variável Germinabilidade (83,5%), seguido do HCl (71,5%) e das técnicas de escarificação mecânica, com lixa (71,5%) e tesoura (67,5%). O HNO3também apresentou o menor número de sementes deterioradas (3,5%); o H2SO4 foi o tratamento que mais causou danos às sementes (36,5%).
ABSTRACTThe species Bombax malabaricum, popularly known as red-cotton tree, presents secondary metabolites of medicinal interest. Like other species of the Malvaceae, their seeds have tegumentary dormancy, which hinders their sexual propagation. Thus, this study aimed to break the dormancy of B. malabaricum through physical and chemical strategies. For mechanical scarification of the seeds it were employed: abrasion of the tegument with sandpaper and cut with scissors in the region opposite to the hilum. For chemical scarification: hydrochloric acid (HCl), nitric acid (HNO3), sulphuric acid (H2SO4), sodium hydroxide (NaOH) and potassium hydroxide (KOH) for a period of 30 minutes. The seeds were also subjected to immersion in 40 mg L-1 of GA3 for the same period. Four replicates of 25 seeds were used for each treatment and then they were conducted for calculation in a B.O.D. germination Chamber. The results obtained were applied in order to calculate: Germination, Germination Speed Index, Average Time of Germination and Percentage of Damaged Seeds. The HNO3proved to be the best treatment in the Germination trials (83.5%), followed by the HCl (71.5%) and the mechanical scarification techniques with sandpaper (71.5%) and scissors (67.5%). The HNO3 also showed the lowest percentage of damaged seeds (3.5%); The H2SO4 was the treatment that caused more damage to the seeds (36.5%).
Subject(s)
Bombax/metabolism , Plant Dormancy/physiology , Nitric Acid , GerminationABSTRACT
Background : Study of fibrilar, cellular and sub cellular structures of mineralized tissues is only possible after the removal of the calcium apatite of these tissues by the process of demineralization. Aims: The present study aims to evaluate six commonly used demineralizing agents to identify the best decalcifying agent. Materials and Methods: The present study included six different decalcifying solutions: 10% formal nitric acid, 8% formal nitric acid, 10% formic acid, 8% formic acid, Perenyi's fluid and Ethylene Di-Amine Tetra Acetic Acid. eight samples of posterior mandible of rat were decalcified in each of the decalcifying solutions and subjected to chemical end-point test. Ehrlich's Hematoxylin stain was used. Statistical Analysis Used: One way ANOVA was used for multiple group comparisons and Chi-square test was used for analyzing categorical data. P value of 0.05/less was set for statistical significance. Results: Samples treated with EDTA showed the best overall histological impression and the tissue integrity were well preserved. Formal nitric of both the percentages 10 and 8% gave fairly good cellular detail and were rapid in their action. Conclusion: The final impression led to the proposition that EDTA was indeed the best decalcifying agent available. However, with time constraint, the use of formal nitric acid is advocated.
ABSTRACT
Objective To com pare and explore the application value of diatom nitric acid digestion method and plankton 16S rDNA PCR method for drow ning identification. Methods Forty drow ning cases from 2010 to 2011 were collected from Department of Forensic Medicine of Wenzhou Medical University. Sam ples including lung, kidney, liver and field water fromeach case were tested with diatom nitric acid digestion method and plankton 16S rDNAPCR method, respectively. The Diatom nitric acid digestion method and plankton 16S rDNAPCR method required 20 gand 2g of each organ,and 15 mL and 1.5 mL of field water, respectively. The inspection time and detection rate were com pared between the two methods. Results Diatom nitric acid digestion method m ainly detected two species of diatom s, Centriae and Pennatae, while plankton 16S rDNA PCR method am plified a length of 162 bp band. The average inspection time of each case of the Diatom nitric acid digestion method was (95.30±2.78) min less than (325.33±14.18)min of plankton 16S rDNA PCR method (P<0.05).The detection rates of two methods for field water and lung were both 100% . For liver and kidney, the detection rate of plankton 16S rDNA PCR method was both 80% , higher than 40% and 30% of diatom nitric acid digestion method (P<0.05), respectively. Conclusion The laboratory testing method needs to be appropriately selected according to the specific circum stances in the forensic appraisal of drow ning. Com pared with diatom nitric acid digestion method, plankton 16S rDNA PCR method has practice values with such advantages as less quantity of sam ples, huge inform ation and high specificity.
ABSTRACT
Nitric acid is a typical strong acid that is colorless, corrosive, and flammable. It is often used for industrial purposes, such as refining, metal cleaning, and electroplating. In Korea, some cases of chemical pneumonitis from nitric acid poisoning have been reported, but to our knowledge, there have been no reports of diarrhea caused by nitric acid poisoning. A 42-year-old man visited a nearby hospital because of continuous diarrhea, coughing, and dyspnea after inhaling nitric acid fumes at his workplace the previous day. He was transferred to our hospital and admitted to the intensive care unit. He showed tachypnea and hypoxemia in our emergency department. Initial chest radiographs showed diffuse interstitial infiltrates and ground glass opacity in both lungs. The patient showed improvements in clinical symptoms and on chest radiographs after receiving oxygen and mechanical ventilation, antibiotics, and systemic glucocorticoid therapy. After 20 days he was discharged and showed no symptoms and sequelae on his 1-year follow-up.
Subject(s)
Humans , Hypoxia , Anti-Bacterial Agents , Cough , Diarrhea , Dyspnea , Electroplating , Emergencies , Follow-Up Studies , Glass , Inhalation , Intensive Care Units , Korea , Lung , Nitric Acid , Oxygen , Pneumonia , Respiration, Artificial , Tachypnea , ThoraxABSTRACT
An unusual case of suicidal nitric acid ingestion is being reported in a 24 year-old factory worker, with classical postmortem features of xanthoproteic reaction and necrotic perforation of stomach.
ABSTRACT
In Brazil, one of the top apple producing countries in the world, apple processing is an increasing activity, with pomace as the main by-product. To extract pectin from pomace, factors affecting process and product should be studied for optimization. A model to produce LMP directly from dried apple pomace was established observing the effects of HNO3 concentration and the time of reaction at 97ºC, analyzed from a statistical and practical point of view. The model for gravimetric yield (R² =0.9834) predicts the highest value of 20.07 g/100 g (126 mM; 14.07 min) of a pectin with a degree of esterification of 48.49 percent. The model for degree of esterification of extracted pectin (R²= 0.9797) predicts the lowest value of 43.73 percent (200 mM; 10.07 min) with a yield of 16.77g/100 g. The results using the central coordinates (100 mM; 10 min) for gravimetric yield were 19.01 g/100 g and for the degree of esterification, 50.79 percent.
No Brasil, um dos países com alta produção de maçã, o seu processamento é uma atividade em crescimento tendo o bagaço como principal sub-produto. Para extrair pectina do bagaço os fatores que afetam o processo e o produto devem ser otimizados. Um modelo para extrair LMP foi estabelecido observando os efeitos de concentrações de HNO3 e do tempo de reação a 97ºC, analisados estatística e praticamente. O modelo para o rendimento (R² =0,9834) prediz o mais elevado valor de 20,07 g/100 g (126 mM; 14,07 min) de pectina com grau de esterificação de 48,49 por cento. O modelo para o grau de esterificação de pectina extraída (R²= 0,9797) prediz o mais baixo valor de 43,73 por cento (200 mM; 10,07 min) com um rendimento de 16,77g/100 g. Os resultados usando as coordenadas do ponto central (100 mM; 10 min) para o rendimento foram 19,01 g/100 g e para o grau de esterificação, 50,79 por cento.
ABSTRACT
Objective To establish the method of determining the content of lead in Cynomorium Songaricum Rupr.by atomic fluorescen spectrometry.Method After digested by perchloric acid-nitric acid,atomic fluorescen spectrometry was used to determining the content of lead in Cynomorium Songaricum Rupr..Results When the concentration of trace lead was 0.00～10.00 ng/mL,it had linear relationship with fluorescence intensity.The linear function was Y =408.459 3X-72.159 5,and the linear correlation coefficient was 0.999 5.The relative standard deviation of six determination results of the samples was 2.8%.The recovery rate was 93.7%～96.0%.Conclusion The method is featured by easy operation,fast speed and good sensitivity.
ABSTRACT
Chemical pneumonitis usually occurs after occupational exposure and inhalation of various noxious gases, fumes and chemical compounds. There have been reports of different clinical cases after inhalation of many organic acids, but chemical pneumonitis after nitric acid inhalation has rarely been reported, especially in Korea. Nitric acid is a strong acid that's commonly used in the industrial field and its respiratory exposure can cause diverse reactions, including pulmonary edema. We experienced a 34 year-old patient who had an excessive cough and dyspnea after an acute massive exposure to nitric acid fumes at his workplace, where they refined and polished the metals. He was tachypneic and the arterial blood gas analysis showed hypoxemia on hospital admission. The chest radiograph showed patchy consolidation and diffuse interstitial opacities on whole lung fields. Five days later after conservative management that included an oxygen supply in the intensive care unit, his symptoms were improved and the hypoxemia was corrected. At the 8th day, the chest radiograph became normal.
Subject(s)
Adult , Humans , Hypoxia , Blood Gas Analysis , Cough , Dyspnea , Gases , Inhalation Exposure , Inhalation , Intensive Care Units , Korea , Lung , Metals , Nitric Acid , Occupational Exposure , Oxygen , Pneumonia , Pulmonary Edema , Radiography, ThoracicABSTRACT
Nitric acid is an oxidizing agent used in metal refining and cleaning, electroplating, and other industrial applications. Its accidental spillage generates oxides of nitrogen, including nitric oxide (NO) and nitrogen dioxide (NO2), which cause chemical pneumonitis when inhaled. The clinical presentation of a nitric acid inhalation injury depends on the duration and intensity of exposure. In mild cases, there may be no symptoms during the first few hours after exposure, or the typical symptoms of pulmonary edema can appear within 3-24 hours. However, in cases of prolonged exposure, progressive pulmonary edema develops instantaneously and patients may not survive for more than 24 hours. We report a case of a 44-year-old male who was presented with acute respiratory distress syndrome after nitric acid inhalation. He complained of cough and dyspnea of a sudden onset after inhaling nitric acid fumes at his workplace over a four-hour period. He required endotracheal intubation and mechanical ventilation due to fulminant respiratory failure. He was managed successfully with mechanical ventilation using positive end expiratory pressure and systemic corticosteroids, and recovered fully without any deterioration in his pulmonary function.
Subject(s)
Adult , Humans , Male , Adrenal Cortex Hormones , Cough , Dyspnea , Electroplating , Inhalation , Intubation, Intratracheal , Nitric Acid , Nitric Oxide , Nitrogen , Nitrogen Dioxide , Oxides , Pneumonia , Positive-Pressure Respiration , Pulmonary Edema , Respiration, Artificial , Respiratory Distress Syndrome , Respiratory InsufficiencyABSTRACT
Chemical pneumonitis is caused by the inhalation of noxious chemical substances and is a cause of occupational lung disease. Nitric acid, which is a one of the common air pollutants and a potential oxidant for refining and cleansing of metals, has a chance for occupational and environmental exposure. A 52-year-old man visited our hospital due to coughing and dyspnea after the inhalation of nitric acid fumes at his workplace. He had conditions of tachypnea (respiratory rate 26 /min) and hypoxemia (PaO2 42.6 mmHg, SaO2 80.2% in room air) in our emergency department. The chest radiographs showed diffuse interstitial infiltrates and ground glass opacity in both lungs. The patient made improvements in clinical symptoms and chest radiography after being given a supply of oxygen, antibiotics, and bronchodilator therapy without systemic glucocorticoid therapy. On his follow up visit after 4 weeks, he showed no symptoms and sequelae, and the pulmonary function test showed a normal pulmonary function.
Subject(s)
Humans , Middle Aged , Air Pollutants , Hypoxia , Anti-Bacterial Agents , Cough , Dyspnea , Emergency Service, Hospital , Environmental Exposure , Follow-Up Studies , Glass , Inhalation , Lung , Lung Diseases , Metals , Nitric Acid , Oxygen , Pneumonia , Radiography , Radiography, Thoracic , Respiratory Function Tests , Tachypnea , ThoraxABSTRACT
Chemical pneumonitis induced by nitric acid inhalation is a rare clinical condition. The previously reported radiologic findings of this disease include acute permeability pulmonary edema, delayed bronchiolitis obliterans, and bronchiectasis. In very few published rare radiologic reports has this disease manifested as acute alveolar injury; we report a case of acute chemical pneumonitis induced by nitric acid inhalation which at radiography manifested as bilateral perihilar consolidation and ground-glass attenuation, suggesting acute alveolar injury.
Subject(s)
Bronchiectasis , Bronchiolitis Obliterans , Inhalation , Nitric Acid , Permeability , Pneumonia , Pulmonary Edema , RadiographyABSTRACT
OBJECTIVE:To establish the chemical identification method of bis muth subcarbonte in weishusan.METH?ODS:The samples were ignited,then bismuth subcarbonate in residue was identified by the identification method of bismuth of identification method of potassium iodide from Chinese Pharmacopenia,with dilute nitric acid as solvent.RESULTS:Bis?muthic salt positive result was found in all dilute nitric acid solvent,this method could eliminate the interference with identi?fication of bismuth subcarbonate from traditional Chinese medicinal components in weishusan,it could also exclude the pseu?do-positive and pseudo-negative reaction,the color was easy to identify.CONCLUSION:This method is simple and stable and therefore applicable to quality control of weishusan.